Spare parts (page 2)

2’’ Male/Female 45° Elbow
Fitting : Male / Female
Direction : 45°
Pipe size : 2" (60mm)

Directional Cristal series Jet
Stainless steel front
To screw
Socket not included

Slice Valve 2'' M/F
Connection : Male / Female
Pipe size : 2" (60mm)

HSP2200 massage pump
Power : 3HP - 2200W - 800 L / min - Single speed 

Thermal spa heater
Double resistance - Increased reliability
To be mounted inside the engine block
Power : 1800W
NOT compatible with spas equipped with old single resistance heaters

Circulation pump 24/24h Laing E14 – 1/8HP
ECM system (electromagnetic) The most silent on the market.
Pump input and output in 1.5’’ (48mm)
Laing / Xylem reference : E14-NSTNDNN2W-05

Adaptor 3/4 "F to 3/4'' M ribbed
To change a female output to a ribbed output
 

2’’ union adaptable on all the Chinese filtration and massage pumps. Screw thread diameter: 80 mm Diameter of the connection to the pipe: 60 mm

1.5’’ Male/Female 90° Elbow
Fitting : Male / Female
Direction : 90°
Pipe size : 1.5"" (48mm)

Clamp for ¾ inches pipes To connect your ¾ pipe to a male 3/4 end part WATERWAY reference: 872-0300

Heater component + Circulation pump for inflatable spas
Ospazia, Aquaspa, Sunbay, Bcool II, Lumix, Infinite Spa...
To be mounted inside the motor block

ATC700 blower for spa
1 HP - 700 watts 

1 inch male and 3/4" female cap 
For a pipe or a manifold with a 1 inch or 3/4" diameter

Jet 2'' (57mm) Twin RotoCristal series Inox face
Manufacturer part number : j-2023

50mm spa pump union
Adaptable on all the filtration and massage pumps of the same diameter.
Screw thread diameter : 62 mm
Diameter of the connection to the pipe : 50 mm

1.5 inch male cap (external diameter : 48 mm)
For a pipe or a manifold with a 1.5 inch (48 mm) diameter

Directional jet 3 "(85mm) - Cristal series
Stainless steel front
Socket not included
Clip-on jet

1’’ PVC Tee
Tee Internal diameter : 1'' (33 mm)

2’’ Manifold M/F - 6 barbed ports 3/4’’
LVJ reference : L-3002

KL8-3 Control System + Control Panel
Up to 3 massage pumps
Compatible with KL8-3H control panel

Pneumatic switch Reference: TBS135A
To start/stop a device.
5A resistive / 250 VAC - 2A inductive / 250 VAC

Spa filtration pump JA35
0.35 HP - 250 watts - 150 liters/min
To fit on 1.5""(48mm) spa pipe
Replaced by the JA50 model

Circulation pump for spa Ospazia, Aquaspa, Bcool II, Lumix, Infinite Spa...
To assemble inside the motor unit For spa from 2010

Face diameter : 22mm
Hole fitting diameter : 12-14mm
Internal LED fiting : 6mm