Single-Speed Massage Pump LX WP300-I
The LX WP300-I pump is a single-speed massage pump model. Do not confuse this pump with the WP300-II which is a dual-speed model.
Features:- 3 HP (2.2 kW) - 240 Volts - 50 Hertz - 10 Amp
- Max. flow rate: 730 L/min
- Hmax: 17 m
- Outer diameter discharge/suction: 78 mm
- IPX5 standard motor cooling for gradual temperature rise
- Thermal overload detector to preserve and increase motor lifespan
- Equipped with a 40µ/450 V capacitor
Dimensions:Length: 431 mm
Pipe Connection
Pump delivered with 2 outlets of 63 mm (inner diameter)
You can also reuse your old pipe fittings if they are still functional.
If your piping differs, access our Fittings and Unions range to find the fitting that matches your piping.
The pump body is adjustable to fit your piping. You can have the discharge on the left or right depending on your installation. To do this, simply unscrew the 4 motor screws to turn your pump body in the desired direction. Then, replace the screws in place.
Pipe Connection
The pump is supplied with a cable without a plug. You can keep your old cable to connect this new pump. If your plug is no longer usable, you can opt for new plugs in our Cables and Plugs for Spas section.