Boospa "Seconde Vie" 

Visual peculiarity : none

One liter bottle BUT contains 800 ml
Complete chlorine-free treatment solution with active oxygen, reinforced by an anti-algae agent. Suitable for any type of spa
Manufacturer Part Number : 250886

Visuel peculiarity : none
With 2-pumps overlay but allows to manage ONLY ONE massage pump.
M24A spa control panel.
Control panel used by a lot of Asian brands: Monalisa, JnJ, Jazzi and many others...

Visual peculiarity : none
Union connector and cables not included
But it works perfectly
Integrated 3 kW heater

Visual peculiarity : Sold without MPT adapter (bottom)
Caracteristics : outside ø 120mm/Length 290mm/Top : Handle
Manufacturer reference : 40281

Equipped of a 3Kw heater.
M7 temperature sensors.
Ideal for swim spas.

Length : 25cm
Compatible with heaters : Balboa
Washers missing

Visual peculiarity : none
Caracteristics : Faceplate ø 110mm/Length 113mm/Jet body ø 41mm

Visual specificity : none
2 inch female cap (internal diameter 60 mm)

Manufacturer Reference: 06040000-2
Power: 1/15HP
220V - 50Hz - 1 speed

Visual peculiarity : none
1 of the 2 holes is damaged
Caracteristics : Headrest length 280mm/Distance fixing points 220-230mm/Pins (not included)

Sold with a single connector plug, the other side of the cable is free pluggable.
Able to connect KL8 temperature sensor to the PCB

Visual peculiarity : a few visibles scratches
Only suitable for E10 circulation pump
Bearing not included

Visual Specificity : slight visible dust

Compatible with filters C-4326 / C-4950

Unusual feature : electronic box changed, slight traces of use
Specifications : Ref. 10233322/Bi-speed/2HP

Distinctive feature : damaged packaging
Characteristics : ø ext. 152mm/Length 207mm/Top : Handle/Bottom : SAE screw thread (38mm ø int., 47mm ø ext.)

Perfect to keep the water clean.

Visual peculiartiy : none
Used part
Back faceplate for LX Whirlpool pump for DH1.0
Faceplace reference: B451-01

Visual Uniqueness : none
Specifications : 181cm x 102cm/Standard Insulation/Black
Non-contractual photos

Visual peculiarity : none
Used part, carefully reconditioned.
Caracteristics : Length 275 mm/Fixing with pins/Black

Light Board for Caldera Spa
Associated with control panel 76846, can replace control panel 76269
Manufacturer Reference: 78864

Visual singularity : bent and repaired foot

Visual oddity : several dents on the fan cover and damaged plastic electronics box
Specifications : 3HP- 2kW/Mono-speed

Distinctive features : Aged packaging
Features : Length 235mm/Outside dia. 152mm/Top : Handle/Bottom : 2’ MPT screw thread (60 mm O.D.)

Visual uniqueness: none
Features: Compatible with many control systems/S-SPA and M-SPA Gecko systems use this heater.

Missing probe slot.

Visual uniqueness : broken top base

Visual peculiarity : traces of wear on rear panel
Caracteristics : Length 320 mm/Distance fixing point 160 mm/Pins fixing

Visual peculiarity : none

Visual peculiarity : none
Compatible with ET-S100 system
Lighting - ON/OFF - Blower/Pump - Pump

Visual identity : used packaging
Features : Length 395mm/Outside dia. 200mm/Top: Handle/Bottom: 2’ MPT screw thread (60 mm O.D.)

Connection : DIN - 4 wires
Front diameter : 130mm
ABS or STAINLESS STEEL front

Visual Specificity: replacement of the electronic housing and pump body, the fan cover and housing are slightly damaged
Union fittings and cables not included
Specifications: dual-speed / 2.5HP

Distinctive features : slight signs of wear, slightly damaged plastic casing and replaced high-speed capacitor.
Features : dual speed/2HP/56 Frames/Suction and discharge connections 78mm (2")

Visual peculiarity : none
Second hand part - in perfect condition
Caracteristics : Length 305 mm/Distance fixing points 160 mm/Pin attachment (sold separately)/Black

Visual peculiartity : none 
Caracteristics : Height 43 mm/Outside diameter 104 mm/Inside diameter 50 mm

Visual peculiarity : none
Compatible with ET-S100 system
Heater - Blower - Pump - Lighting

Top base broken
Outer Diameter : 153mm
Length : 267mm
Top : 49mm Opening
Bottom : 49mm Opening

Distinctive features : traces of wear and a partially broken fin
Characteristics : Single speed/Motor 56 frames/Ø 94mm discharge and suction screw threads
Connectors not supplied

Distinctive features : Pump casing and capacitor replaced, fan cover and casing slightly damaged.
Features : 2.5HP/Mono-speed.
Fittings and cable included

Visual highlight : new paintwork, small dent in fan cover and various signs of wear. Fittings not included.
Specifications : 3HP/Mono-speed/screw thread diameter 78mm

Visual peculiarity : none
Compatible with ET-S100 system
Lighting - Heater - Blower/Pump - Pump

Visual peculiarity : a slight depression in the central part
Caracteristics : Dimensions 239cm x 239cm/Radius : 29cm/Brown

Broken lid.
The Egg is a well-designed floating diffuser.
As original in its shape as in its use, it allows you to store up to 25 tablets and releases the necessary amount directly into your spa.

Visual singularity : none
Features : 1"(33mm) F; 12 outputs 3/8"(14.5mm) M barbed
Missing one cap.

Visual Peculiarity : none