The
Waterway Executive Euro pump is undoubtedly the most common and reputable pump used in spas sold in France and Europe. This pump features an Italian EMG electric motor, ensuring silence and reliability.
It has been installed in top spa brands such as
Jacuzzi, Hotspring, and Caldera. This product sheet presents the Single-speed models, for the Dual-speed models, click on the following link: Spa pump Executive Euro Dual-speed This is the
56 Frame version corresponding to the motor size.
This pump is different from the 48 Frame version, which is smaller. The manufacturer increased the motor size to make it more robust and reliable. It is important to correctly identify the frame of your Waterway Executive Euro pump.
Specifics of the Executive Euro - WATERWAY pump- High-performance spa massage pump manufactured by the renowned Waterway brand (USA)
- EMG motor of Italian manufacture, highly reliable.
- 2 double shielded ball bearings, moisture-resistant with grease for quieter operation and extended lifespan
- Single-speed motor
- Capacitor (start and stop) for lower energy consumption (2HP: 25µF / 3HP: 40µF)
- Motor protection
- Manufactured to IPX5 standards
- 78mm male threaded suction connection (94mm optional)
- 78mm male threaded discharge connection
- 2HP (1500 watts)
- 78mm suction: PF-20-1N22X replaces reference 3R10850-OD
- 94mm suction: PF-20-1N22X25
- 2.5HP (2000 watts)
- 78mm suction: PF-25-1N22X (Obsolete: replaced by the 3HP model)
- 3HP (2250 watts)
- 78mm suction: PF-30-1N22X replaces references 3R11250-0D or PF-30-1N22C4
- 94mm suction: PF-30-1N22X25
Dual-speed:
- 2HP (1500 watts)
- 78mm suction: PF-20-2N22X replaces reference 3R20850-0D
- 94mm suction: PF-20-2N22X25
- 3.2HP (2480 watts)
- 78mm suction: PF-25-2N22X replaces reference PF52N22X
- 3.5HP (2710 watts)
- 78mm suction: PF-30-2N22X replaces references 3R21050-0D or PF522N25X or PF-30-2N22C
- 94mm suction: PF-30-2N22X25 replaces reference PF52-N25X-25SP
Technical diagrams
DIMENSIONS: 
Pipe connections
Delivered without outlet fittings You can also reuse your old pipe fittings if they are still functional. If your piping differs, visit our range of
Pump Union Fittings to find the fitting that matches your piping.
The pump body is adjustable to fit your piping. You can have the discharge on the left or right according to your setup. Simply unscrew the 4 motor screws to turn the pump body in the desired direction. Then, reposition the screws.
Electrical connection
The pump is supplied without a connection cable or plug. You can reuse your old cable to connect this new pump. If your plug is no longer usable, you can opt for new plugs in our
Cables and Plugs for Spas section.
Here are the most commonly used Plugs in the Spa world: |  |
| AMP Plug | J&J Plug
(PIN positions vary depending on the device) |
