Manufacturer parts (page 2)

Inflating pipe for spas Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa
Length : 95 cm

MSPA reference : B9300679
Compatible with MSPA Bubble spa from generation LITE and Lite 2015
MSPA Europe spa compatible only

PCB for spas Aquaspa, Ospazia, Bcool II, Alton family, Hespéride, Sunbay...
Warning : this card is the spa mother board and is in the motor unit. It is not the one situated under the control panel.

Transformer for MSPA spa Elite & Premium
Compatible with Elite & Premium spas

MSPA reference : B0301560
Compatible with MSPA Bubble spa from generation Gen 2 / Gen 2+ / New 2+

Blower for spa Aquaspa, Ospazia, Bcool-II, Alton Family, Heperide, Sunbay... To assemble inside the motor unit.

MSPA Reference : B9301428
Has 8 clip-on fixings
Compatible with MSPA round inflatable spas with an outside diameter of up to 205 cm
Color : gray
Inflatable spa on the picture are not included 

Horizontal manometer for inflatable spa Ospazia, Aquaspa, Bcool II, Sunbay, Hesperide ...
It enables you to check that your spa is correctly inflated.

Air cap for control Panel Support of MSPA Bubble Spa
MSPA reference : B0800017
Compatible with the generation of MSPA Gen 2 Gen 2+ and New2+

Jet Premium Panel for Mspa inflatable spas Compatible with MSPA Bubble spa from generation Premium This panel has a JET button

SS20 Lite heater for MSPA spas
Compatible with MSPA Bubble spa from Lite 2020 generation
MSPA reference : B9301406Gasket not included

Starter kit for MSPA inflatable spa
All necessary care products for your inflatable spa
Include : Bromine tablets, Chlorine free spa shock, Diffuser and 2 MSPA filters

Printed circuit board for MSPA spa remote control
MSPA reference : B9301191 / B9301277 / B9301396
Compatible with SS20 Lite, SS18, SS19 and SS20 Delight remotes
Programmed on / off function
Digital display screen

Ozone injector for MSPA spas
MSPA reference : B9301037
Compatible with the generation of MSPA Premium Include : injector, seal and o-ring

Remote control compatible with MSPA Premium 2019-2022 inflatable spas
Manufacturer Part Number : B9301287
Sold without cable

MSPA reference : B9301397
Compatible with SS19 Mono, SS19-SS20 Elite and SS19-SS20 Premium MSPA remotes
Digital display screen

Drain plug for MSPA inflatable spas.
Compatible with all MSPA models
Diameter : 26mm

SS18 Delight heater for MSPA spas
Compatible with MSPA Bubble spa from Delight generation
1500Wats

MSPA reference : B9301427
Has 6 clip-on fixings
Compatible with MSPA round inflatable spas with an outside diameter of up to 180 cm.
The inflatable spa on the photo is not included

Printed circuit for MSPA inflatable spa remote controls
MSPA reference : B9301485
Equipped with 7 buttons + digital screen

Seal for MSPA inflatable spa motor unit
External diameter: 44.7mm
Matches up with Lite, Lite 2015, Jb301 and JB304 motor unit
MSPA Reference : D0101641

Manufacturer reference : B9301653
With smart control panel PRCD plug included
Without UVC

HiLimit Temperature Sensor for MSPA Spa
MSPA reference : B0301587
Compatible with all generations of MSPA except DELIGHT and Tuscany

Suction nozzle + delivery nozzle pack
Everything you need to improve water circulation and create the ultimate bathing experience!

Temperature protection for heater
To shut off the heater when hight temperature was detected

Manufacturer reference : B9301435
MSPA square inflatable SPA mat for 4 people LS04
Equipped with 8 adjustable straps with male clips
Color : gray
Dimensions : 156 x 156 cm

Control Panel for BeSpa inflatable spa
PCB card situated under the panel included

Compatible with MSPA Bubble spa from generation LITE 2020
MSPA reference : B9301408
Compatible spa MSPA Europe uniquement

Air circulation elbow (blower check valve) for spas Aquaspa, Ospazia, Becool II, Alton family, Hespéride. To assemble at the output of your blower.

Grey PVC base for inflatable spa control panel.
Compatible with the brandsAlton Family, - Aquaspa - Bcool 2 - Bcool II - Garden Allstore - Hesperide - Ospazia - Sunbay - Water Health,Infinite Spa, Lumix..

Manufacturer reference : B9301604 / D0301166
Length : approx. 80cm
Including 1 gasket

Inflatable Spa Panel Back Face To fix the panel on the inflatable spa support.
Compatible with the brands: Alton Family, Aquaspa, Bcool 2, Bcool II, Garden Allstore, Hesperide, Sunbay ...

Basin compatible with MSPA C-MO069 inflatable spas
MSPA reference : B9301213
Capacity : 6 persons
Dimensions : 173cm x 70 cm
Weight : 20kg
It is sold without its engine block
Cover NOT included