Description
How the HSP1500 model hydromassage pump works
The
HSP1500 spa pump is a
massage pump. It is used to power the massage circuit. When the electric motor is running, it activates its
impeller located in the
Wet End , which in turn creates flow. Pressurized water comes out through the
massage nozzles to provide you with a pleasant hydrotherapy experience.
Do not confuse with a
filtration pump (or circulation pump) which it serves avoid stagnation of water and filter all its impurities. Generally less powerful than a massage pump.
The specifics of the HSP series spa pump
This massage pump is
silent and has very
low vibration while allowing a
flow rate of 670 L / min . With its
MEC80 motor , it releases a
power of 1500W (or 2.0 HP) . Its voltage oscillates between
220 and 240V (50Hz) for a
total weight of 13.4Kg . A
25 µF capacitor allows to start it (included with the pump)
The single speed HSP1500 is protected against dust and any other microscopic residue. Its
IPX5 standard provides protection against water jets with a flow rate of 12.5 L / min.
Its
classification F with an
anodized motor body , allows it to be insulated at a maximum ambient temperature of 40 ° C.
(Maximum admissible heating: 105 K - Thermal reserve: + 10K)
Pump delivered with : - Two pipe fittings 2 inch diameter (60mm)
- Its power cable with AMP plug of about 2M
Lengths of all pumps in the HSP series :
| Model | HSP1500 | HSP1800 | HSP2200 | HSP3000 |
| Length (mm) | 380 | 380 | 395 | 435 |
Characteristics of all pumps in the HSP series :
| Model | Power (HP) | Power (W) | Max flow (l/min) | H Max (m) |
| HSP1500 | 2.0 | 1500 | 670 | 13 |
| HSP1800 | 2.5 | 1800 | 720 | 15 |
| HSP2200 | 3.0 | 2200 | 800 | 17 |
| HSP3000 | 4.0 | 3000 | 920 | 19 |
Compatibility
This
pump model is retrofitted, that is to say it can replace any other spa pump with the same power (HP) and the same size.
