SPECIAL OFFER: Don't wait, you will receive an EA450 instead of your EA390!
Same dimensions, same footprint, same connections, more power LX WHIRLPOOL EA390 Pump
- 1.2HP (0.9 kW) spa massage pump for increased performance and reduced noise
- Single speed
- Max flow rate of 335 liters per minute
- Designed for optimal performance and flow
- Outer diameter of suction and discharge threads: 62 mm
- IPX5 motor cooling standard for gradual temperature rise
- Thermal overload detector to preserve and extend motor life
- Equipped with a capacitor (Allows pump ignition/triggering)
- Suitable for spas and whirlpool baths
Model | Max Flow (Q) in l/min | Max Head (m) | Power kW | Power HP | H1 | H | L | Weight (kg) | Package Dim. (cm) |
EA390 | 335 | 16 | 0.9 | 1.2 HP | 50 | 190 | 380 | 10.5 | 420x180x255 |
Technical Diagrams
Pipe Connection
Comes with 2 x 1.5" outlet fittings (48 mm inner diameter)
You can also reuse your old pipe fittings if they are still functional.
If your piping differs, access our Fittings and Unions range to find the corresponding fitting for your piping.
The pump body is adjustable to fit your piping. You can have the discharge on the left or right based on your setup. Simply unscrew the 4 motor screws to rotate your pump body in the desired direction. Then, replace the screws in place.
Electrical Connection
The pump comes with a connection cable without a plug. You can keep your old cable to connect this new pump. If your plug is no longer usable, you can opt for new plugs in our
Spa Cables and Plugs section.
Here are the most commonly used Plugs in the Spa world: |  |
AMP Plug | J&J Plug (PIN position varies depending on the device) |