AQUASPA

Internal draining cap for spa Aquaspa, Ospazia, Becool II, Alton family, Hespéride Lumix, Infinite Spa..
To fix at the bottom of your inflatable spa.
You will receive one of the 2 versions depending on availability in stock (see photos) - Identical dimensions.

Thermal spa heater
Double resistance - Increased reliability
To be mounted inside the engine block
Power : 1800W
NOT compatible with spas equipped with old single resistance heaters

Heater component + Circulation pump for inflatable spas
Ospazia, Aquaspa, Sunbay, Bcool II, Lumix, Infinite Spa...
To be mounted inside the motor block

Circulation pump for spa Ospazia, Aquaspa, Bcool II, Lumix, Infinite Spa...
To assemble inside the motor unit For spa from 2010

Protection bag for inflatable spa filter.
Protects your filter during the bath.
Extends the lifespan of your filters.
Compatible with the filters Aquaspa, Ospazia, Hesperide, Alton Family, Mspa etc.

Flow switch for inflatable spas
Compatible with many brands of inflatable spas

Inflatable spa control keypad
PCB located behind the keypad included
Keypad dimensions : 128 mm x 84 mm
Color : red
Compatible with the brands : Alton Family, Aquaspa, Bcool 2, Bcool III, Garden Allstore, Hesperide, Sunbay ..

Inflating valve + cap for inflatable spa Adaptable for spas Ospazia, Aquaspa, Bcool II, Alton Family, Hesperide, Sunbay ...

Drain plug for inflatable spa Ospazia, Aquaspa, Bcool II, Sunbay, Hespéride, Lumix, Infinite Spa..

Transformer for inflatable spa Aquaspa, Ospazia, Hesperide, Be Cool 2, Sunbay...
To assemble inside the motor unit.
Input : 240V - 50Hz - 0.3A
Output : 11.6V - 3.3A

Temperature sensor for inflatable spa Alton Family, Aquaspa, Bcool 2, Bcool II, bespa, Garden Allstore, Hesperide, Losiane, Ospazia, Spark, Sunbay, Water Health
Probe Length : 25 mm

Inflating pipe for spas Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa
Length : 95 cm

PCB for spas Aquaspa, Ospazia, Bcool II, Alton family, Hespéride, Sunbay...
Warning : this card is the spa mother board and is in the motor unit. It is not the one situated under the control panel.

Blower for spa Aquaspa, Ospazia, Bcool-II, Alton Family, Heperide, Sunbay... To assemble inside the motor unit.

Horizontal manometer for inflatable spa Ospazia, Aquaspa, Bcool II, Sunbay, Hesperide ...
It enables you to check that your spa is correctly inflated.

Temperature protection for heater
To shut off the heater when hight temperature was detected

Control Panel for BeSpa inflatable spa
PCB card situated under the panel included

Air circulation elbow (blower check valve) for spas Aquaspa, Ospazia, Becool II, Alton family, Hespéride. To assemble at the output of your blower.

Grey PVC base for inflatable spa control panel.
Compatible with the brandsAlton Family, - Aquaspa - Bcool 2 - Bcool II - Garden Allstore - Hesperide - Ospazia - Sunbay - Water Health,Infinite Spa, Lumix..

Inflatable Spa Panel Back Face To fix the panel on the inflatable spa support.
Compatible with the brands: Alton Family, Aquaspa, Bcool 2, Bcool II, Garden Allstore, Hesperide, Sunbay ...

Connection cable (panel/PCB) for inflatable spa Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Sunbay...

Motor Unit for Aquaspa
Compatible with the inflatable spa brands : Hesperide, Ospazia, Spark, Aquaspa, Sunbay, Becool II, Waterhealth, BeSpa Lumix, Infinite Spa and Bubblespa.

Nozzle disassembly tool for spa Aquaspa, Ospazia, Becool II, Alton family, Hespéride. This tool allows to disassemble the nozzle of your inflatable spa.

Inflatable spa backflow nozzle Simple and rapid assembly Compatible with the brands Alton Family - Aquaspa - Bcool 2 - Bcool II - Bespa - Garden Allstore - Hesperide - Losiane - Ospazia - Spark - Sunbay - Water Healt

Inflatable Spa Control Panel with WiFi control
Length : 128 mm
Width : 84 mm
PCB card situated under the panel included

Complete motor block for Aquaspa UK spa
16A - 220-250V - 10mA - IP55
Supplied with a UK plug - Type G

Compatible with Hesperide, Ospazia, Spark, Aquaspa, Sunbay, BecoolII, Waterhealth, BeSpa, Bubblespa, Lumix, Infinite Spa, and many others

Reference Aquaspa : PH050017
Colour : Black and white
Diameter : 175 cm
Basin sold alone - motor block not included

Clamping ring for backflow nozzle for inflatable spa Ospazia, Aquaspa, Bcool II, Infinite Spa, Lumix..
Part on which the filter screws.

Replacement Basin for 6 persons inflatable spa
Compatible with AQUASPA motor unit (Ospazia, Hesperide, Sunbay, Be spa, Infinite Spa, Lumix, and many others)
Top lid + cover + motor unit not include