All brands (page 6)

1.5’’ spa pump union
Screw thread diameter : 62 mm
Pipe connection diameter : 48 mm
1 gasket included

Clamp for 3/8 Inches Pipes To connect your 3/8 pipe to a male end part.
sold individually

Manufacturer no . : LSS220
Fills up with water to obtain the wanted size
Made of material that resists to heavy loads and heat

SpaBalancer is an innovation that allows you to keep your spa water crystal clear, clean and odorless
using a completely biological process and without the use of chlorine.

Content : 1L

Manufacturer's reference: 33-6350
Allows connection between a 60mm (ext. diam.) and 60mm (ext. diam.) pipe.
Connection type : M/F

This ingenious spa cover is compatible with all the spas that have a width that is inferior to 225cm. Thanks to its gas spring, you will have no difficulty to manipulate your cover. It only requires 15cm of spacing.

Replacement UV Bulb 18W - 31.5cm Natural and automatic purification system. Many used in WELLIS® spas

1.5’’ PVC Tee
Tee Internal diameter: 1.5'' (48 mm)

HTH Spa filter cleaner
Cleans and descales the cartridge or sand filter.
1 L

¾’" male cap (former model)
For a pipe or a manifold with a ¾ inch diameter
Waterway reference : 715-9860

1 liter bottle. Cleans and descale the spa – Pine scent

Screw thread diameter: 78 mm
Diameter of the connection to the pipe: 63mm

Chlorine HTH Spa Shock Against the green or cloudy water 2 Kg box

Flow switch for inflatable spas
Compatible with many brands of inflatable spas

External diameter: 214mm
Length: 355mm
Top: 78mm opening
Bottom: SAE screw thread (external diam. 45mm)

Balboa Wi-Fi Module Control your spa anytime, anywhere, anyplace ! Compatible with control boxes from the BP series
50350 and 25657 included

Inflatable spa control keypad
PCB located behind the keypad included
Keypad dimensions : 128 mm x 84 mm
Color : red
Compatible with the brands : Alton Family, Aquaspa, Bcool 2, Bcool III, Garden Allstore, Hesperide, Sunbay ..

Reducer 1'' M – 3/4'' M ribbed
Reducer : Male 1"(33mm) to Male 3/4"(27mm) ribbed To fit inside of a 3/4" pipe

Cover lifter SimpleLift 8 Under (TS-T01) for spa

Pump union reducer 2.5’’ to 2’’
To increase the pump output in 2’’ to a 2.5’’ output.
Internal diameter of the screw thread: 78 mm
External diameter of the screw thread: 94 mm

HDP2200II massage pump
3.0HP - 2200 watts - 730 liters / min
2 pipe fittings 2" (60mm) outside diameter included

References : 40101 - C-4310 - PWW10 - FC-3077
Outside diameter: 107mm
Length : 102mm
Top : Open - 52mm
Bottom : Open - 52mm

Straight spa headrest pillow
Headrest length : 245 mm
Width: 135mm
Fixing with pins (not included)
Distance between the two pins : 142mm
Pillow medallion not included